Images can usually be enlarged by clicking them
Use Back Button to Return
Introduction | I. History of Winchester Guns | II. Models | III. Variations | IV. Outline of Features | V. Condition | VI. Diagrams
Standard Gun
 | Solid frame or take down in 12 or 16 gauge |
| Full, Modified or open cylinder choke |
| Full round barrel in 30" (12 gauge) or 28" (16 gauge) length |
| Plain modified pistol- grip walnut stock |
| Grooved slide handle |
| Butt Plate metal and flat |
Trap Gun
| Marked "TRAP" on the frame bottom |
| Solid frame or take down in 12 or 16 gauge |
| Full, Modified or open cylinder choke |
| Full round barrel in 30" (12 gauge) or 28" (16 gauge) length |
| Checkered and oiled pistol- grip or straight fancy walnut stock |
| Checkered slide handle |
| Butt Plate metal and flat |
Pigeon Gun
| Receiver has engraved pigeon on the frame behind the hammer |
| Breech Block is marked "Pigeon" |
| Solid frame or take down in 12 or 16 gauge |
| Full, Modified or open cylinder choke |
| Full round barrel in 28" length for BOTH 12 and16 gauge |
| Checkered and oiled pistol- grip or straight fancy walnut stock |
| Checkered slide handle |
| Butt Plate metal and flat |
Tournament Gun
| Top of Receiver Matted to reduced glare |
| Solid frame or take down in 12 gauge ONLY |
| Full, Modified or open cylinder choke |
| Full round barrel in 30" length for 12 gauge ONLY |
| Checkered and oiled pistol- grip or straight select walnut stock |
| Checkered slide handle |
| Butt Plate metal and flat |
Brush Gun
| Solid frame in 12 or 16 gauge |
| Cylinder choke |
| Full round barrel in 26" (12 gauge) and 26" (16 gauge) length |
| Magazine tube slightly shorter than 'Standard Gun' |
| Plain modified pistol- grip walnut stock |
| Grooved slide handle |
| Butt Plate metal and flat |
Brush Gun Takedown
| Takedown frame in 12 or 16 gauge |
| Cylinder choke |
| Full round barrel in 26" (12 gauge) and 26" (16 gauge) length |
| Magazine tube is same length as an 1897 'Standard Gun' |
| Plain modified pistol- grip walnut stock |
| Grooved slide handle |
| Butt Plate metal and flat |
Riot Gun
| Solid frame or take down in 12 gauge ONLY |
| Full round barrel in 20" length |
| Barrel bored to shoot buckshot |
| Plain modified pistol- grip walnut stock |
| Grooved slide handle |
| Butt Plate metal and flat |
Trench Gun
| Fitted with barrel hand guard and bayonet |
| Solid frame or take down in 12 gauge ONLY |
| Full round barrel in 20" length |
| Barrel bored to shoot buckshot |
| Plain modified pistol- grip walnut stock |
| Grooved slide handle |
| Butt Plate metal and flat |
Introduction | I. History of Winchester Guns | II. Models | III. Variations | IV. Outline of Features | V. Condition | VI. Diagrams